CISCO PVC2300 is supported by ipCam FC (iPhone/iPad App)

Overview ipCam FC for iPhone, iPad, iPod Touch

Manufacturers description

This description has no relation to the features of the app! Its only a copy of the manufacturers description!

Cisco® Small Business Video Surveillance Cameras provide customizable ways for small business owners to monitor and protect their companies. These high-quality solutions can be optimized for many different applications and sites. Each camera can be quickly mounted using the bracket included in the package. The cameras' compact form factor also enables them to be put inside a protective enclosure for interior or exterior installations. The Cisco Small Business Video Surveillance Cameras use removable CS-mount lenses and can be customized with optional zoom, wide-angle, vari-focal, auto-iris, or other types of lenses as required for a specific application or setting. The Cisco PVC2300 Business Internet Video Camera (Figure 1) is a Power over Ethernet (PoE) device, so it can be powered from a PoE switch or power injector via Ethernet cabling. This enables installation near ceilings, on rooftops, or anywhere where power outlets may not be available. The Cisco PVC2300 camera can be mounted on any pan-tilt (PT) base that supports the Pelco D protocol and can be remotely rotated and controlled through an RS-485 interface. It also has two input and two output ports, which can be used to connect the camera to an alarm panel, siren, passive infrared (PIR) sensor, smoke detector, lighting switch (on/off), door sensor, etc. The Cisco PVC2300 uses a high-quality progressive-scan charge-coupled device (CCD) sensor delivering good-quality video. The CCD sensor also has low-light sensitivity, so video can be captured even in very low light environments or during near-dark times of day. Additionally, the camera incorporates an infrared (IR) cut filter that, when used with a separate IR lamp, allows for video capture in total darkness. The Cisco PVC2300 camera supports dual codecs (MPEG-4 and MJPEG). Both codecs can be used simultaneously. MPEG-4 gives efficient bandwidth consumption with good-quality compression and is optimal for real-time viewing of video. MJPEG gives optimal video quality with lossy compression, making it ideal for large-volume storage to a network attached storage (NAS) device. The Cisco PVC2300's audio capabilities include two-way audio, embedded microphone, external speaker and microphone ports, and voice compression. With extensive feature support, such as IP Multicast, Real Time Streaming Protocol (RTSP), Real Time Protocol (RTP), and 3rd Generation Partnership Project (3GPP), video can be viewed from multiple endpoints and client applications such as 3G phones and QuickTime clients on PCs or Wi-Fi phones. Support for multiple network protocols such as 802.1p priority, 802.1q VLANs, and Dynamic DNS (DDNS) make the solution ideal for multiple IP surveillance applications. The camera can also be managed securely using HTTPS. Features • Standard box-type camera allows for flexible installation • Mounts in a standard outdoor or indoor enclosure • Provides controls for mounting on a Pelco pan/tilt base to control movement remotely • Removable CS-mount lens – Camera can be customized for multiple applications – Supports zoom lens, wide-angled, vari-focal, auto-iris lenses, etc • 1/4-inch progressive-scan CCD sensor delivers good-quality video • Low light sensitivity with high-quality lens, sensor, and programmable IR cut filter capability • Audio input/output for external microphone and/or speaker • I/O ports facilitate alarm triggers, turning lights on/off, etc. • PoE allows for flexible installation • Dual codecs (MPEG-4 and MJPEG) supported simultaneously • IP Multicast support • RTSP video/audio streaming to unicast and multicast clients • 4x digital zoom; can also use optical zoom with appropriate interchangeable lens • Real-Time video recording from the Web interface directly with one button recording • PC-less event recording directly to Network Attached Storage via integrated Samba client

Technical specifications Standards IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.1p (QoS Priority), IEEE 802.1q (VLAN) Protocols supported TCP/IP, HTTP, Dynamic Host Configuration Protocol (DHCP), Simple Mail Transfer Protocol (SMTP), FTP, Bonjour, Network Time Protocol (NTP), DNS, Universal Plug and Play (UPnP), RTP, RTSP, and DDNS Ports Ethernet with PoE, microphone IN, speaker OUT, power (12V, 1A), general-purpose I/O (GPIO), 4-pin IRIS port, RS-485 Serial Port Buttons Reset Cabling type Unshielded twisted pair (UTP) Category 5 LEDs Power, Network Camera type Box I/O ports • RS-485 x 1 (2 pins): supports Pelco D Protocol commands • Input control x 2 (2 pins) • Output control x 2 (2 pins) Lens Sensor 1/4-in. progressive CCD sensor Illumination 0.4LUX @ F1.7 Lens type CS-mount lens, fixed focus; adapter also included for lenses that require more distance between sensor and lens Focal length 500mm~infinity (for included lens) Field of view 47º Diagonal (for included lens) Video resolution 640 x 480 (VGA), 320 x 240 (QVGA), 160 x 120 (QQVGA) Frame rate 1 to 30 frames per second (selectable) Iris Provides iris control for CS-mount auto-iris lens when attached Setup/configuration Web UI Built-In web interface for easy browser-based configuration (HTTP) Management Web browser • Internet Explorer 5.x or later • Limited support for Netscape and Firefox. Browser controls for pan/tilt/zoom (PTZ), audio, and motion detection are limited or not supported with Netscape and Firefox. Event logging Event logging (syslog) Web firmware upgrade Firmware upgradable through web browser Video Compression Dual codec • MPEG-4 simple profile • MJPEG • Simultaneous dual stream Snapshot JPEG, BMP Modulation National Television System Committee (NTSC) and Phase Alternating Line (PAL) Image settings Brightness and contrast Zoom 4x digital zoom Night vision IR cut filter for low light Video controls Auto-white balance (AWB), auto-exposure (AES) Image control Select video by quality, bandwidth, and frame rate Format 3GPP for use with 3G phones Alerts Motion detection 4 detection areas with individual sensitivity Email alert 3 email addresses FTP uploading FTP server address and login settings Instant messaging Jabber client support Scheduled Schedule by time Triggers Inputs 1, input 2, motion detection Actions Outputs 1, output 2, messaging, email, FTP Audio Summary 2-way audio Built-in microphone 6mm, -40dB + 3dB Microphone input 3.5-mm phone jack Speaker output 3.5-mm phone jack Compression G.726 - 16K, G.711 A-law and µ-law Sampling rate 8 KHz Default bit rate 16 Kbps Included Video Monitoring System Software (SWVMS16) Monitoring/recording software • Monitoring, recording, and playback for up to 16 cameras • Advanced search histogram or by time and date • Recording set up to record by motion trigger, manual, or schedule Security User list User rights list to view video and/or to control camera functions. Multi-level permissions (Administrator, Operator, and Viewer) Username/password Logon authentication: 20-character username and 8-character password Kensington lock Physical security option Network RTP/RTSP Allows for viewing from any client supporting these protocols, like 3G phones or QuickTime client NTP Keeps time of camera in sync with your network SMTP Allows video clips to be emailed FTP client Facilitates scheduling transfer of images to an FTP server DDNS Facilitates reaching the camera by a name irrespective of camera's IP address. Supports DDNS, TZO, and 3322 DDNS services UPnP Allows autodiscovery of the camera by other UPnP devices IP filtering Allows or disallows access by IP address Power Power options • IEEE 802.3af PoE-48V/0.3A • External power adapter: 12V/1A, 110~120V AC/60 Hz, switching Power consumption 10W Environmental Dimensions 4.72 x 2.99 x 1.81 in. (120 x 76 x 46 mm) Unit weight 1.15 lb (0.52 kg) Power External power adapter 12V DC 1A 110~120V AC/60-Hz switching or PoE 48V/0.3A Certification FCC part 15C Class B, CE, UL, EMC/EMI Part 15B Class B for US Operating temperature 32º to 122ºF (0º to 50ºC) Storage temperature -4º to 158ºF (-20º to 70ºC) Operating humidity 10% to 80% Storage humidity 0% to 19%

More supported CISCO IP Cameras PVC2300, PVC300, WVC200, WVC210, WVC2300, WVC54GCA,

HomePrivacyImprintForum